Production of highly aligned microfiber bundles from polymethyl methacrylate via stable jet electrospinning for organic solid-state lasers

verfasst von

Henrik Alexander Christ, Pen Yiao Ang, Fuzhao Li, Hans Hermann Johannes, Wolfgang Kowalsky, Henning Menzel

Abstract

The fabrication of micron-sized poly(methyl methacrylate) (PMMA) polymer optical fibers doped with rhodamine B as an organic dye is demonstrated. Highly aligned and defect-free fibers are fabricated by using the stable jet electrospinning (SJES) method and systematically varying critical parameters such as solvent type and polymer concentration. At optimal conditions, for example, a polymer concentration of 35 wt% of PMMA in butanone, ribbon-shaped fibers with a smooth surface and diameter of about 20 μm could be spun using SJES mode and deposited on a rotating drum as target in a highly aligned manner. Photoluminescence spectra of the doped fibers excited longitudinally and transversely with a laser show an excitation peak with full-width-at-half-maximum of only 5.05 nm and a low lasing threshold at a pump energy of 0.55 μJ, indicating that SJES could become a new source of amplified optics components or organic solid-state fiber lasers.

Organisationseinheit(en)

PhoenixD: Simulation, Fabrikation und Anwendung optischer Systeme

Externe Organisation(en)

Technische Universität Braunschweig

Typ

Artikel

Journal

Journal of Polymer Science

Band

60

Seiten

715-725

Anzahl der Seiten

11

ISSN

2642-4150

Publikationsdatum

15.02.2022

Publikationsstatus

Veröffentlicht

Peer-reviewed

Ja

ASJC Scopus Sachgebiete

Physikalische und Theoretische Chemie, Werkstoffchemie, Polymere und Kunststoffe

Elektronische Version(en)

https://doi.org/10.1002/pol.20210747 (Zugang: Offen)
http://publikationsserver.tu-braunschweig.de/get/70542 (Zugang: Offen)