PhoenixD Kolloquium

Die Kolloquien finden in der Regel in Präsenz statt. Alle Interessierten sind herzlichen eingeladen an den Veranstaltungen teilzunehmen. Die PhoenixD Mitglieder nutzen das monatlich stattfindende Kolloquium um sich über aktuelle Themen im Bereich der optischen Technologien weltweit auszutauschen.

Teilnahme

Sie möchten am PhoenixD Kolloquium teilnehmen und erhalten die aktuellen Ankündigungen noch nicht per Mail? Dann melden Sie sich bitte bei unserer Geschäftsstelle: Telefon 0511-762 14780, E-Mail: office@phoenixd.uni-hannover.de.

SOMMER 2022

25.04.2022 - Sonderkolloquium

Prof. Dr. Ömer Ilday
Dept. of Physics, Dept. of Electrical and Electronics Engineering and UNAM, Bilkent University, Ankara, Turkey
"Nonlinearity Engineering, from modelocking to collective ultrafast interactions"

Assistant Professor Serim Ilday
Institute of Materials Science and Nanotechnology & National Nanotechnology Research Center (UNAM), Bilkent University, Ankara, Turkey


02.05.2022

Prof. Dr. Anna Giesecke
Fakultät für Ingenieurwissenschaften, Abteilung Elektro- und Informationstechnik, Fachgebiet Elektronische Bauelemente und Schaltungen, UNI Duisburg Essen
"Integrated photonics – Solutions for data for data hungry applications or increasing functionality of chip-based sensors"

Prof. Dr.-Ing. Jürgen Czarske
Institute of Circuits and Systems, Head of Laboratory of Measurement and Sensor System Technique, TU Dresden
"Exploiting Deep Learning and Lensless Optics for Minimally Invasive Endoscopy and Nonlinear Brillouin Microscopy"


05.05.2022 - Sonderkolloquium

Dr. Jelmer J. Renema
Adaptive Quantum Optics group, Faculty of Science and Technology, University of Twente
"Integrated photonic quantum information processing"


30.05.2022

Prof. Dr. Janina Bahnemann
Institut für Physik, Universität Augsburg
"Additive Manufacturing of Microfluidic Systems: From Cell Culture to Point-of-Care Diagnostics"

Dr. Dario Mager
Institute of Microstructure Technology, Karlsruhe Institute of Technology (KIT)
"Low-cost System Design – customizing your setup to your scientific question."


04.07.2022

Priv.-Doz. Dr.-Ing. Christine Ruffert
Transfermanagement iCampus Cottbus, Fraunhofer IPMS – BTU Cottbus-Senftenberg
"NED*-Based Micro-Positioning Systems"

Dr. Johannes Hinrichs
TRIOPTICS GmbH
"Characterisation of Augmented Reality Optics in Laboratory and Production"

BISHERIGE PHOENIXD KOLLOQUIEN

  • Winter 2021/22

    04.10.2021

    Prof. Dr.-Ing. Volker Wesling, TU Clausthal, Institut für Schweißtechnik und Trennende Fertigungsverfahren
    "Eigenschaftsangepasste Werkstoffsysteme in der Additiven Fertigung"

    Prof. Wei Ren, Chinese University of Hong Kong, Department of Mechanical and Automation Engineering
    "Advanced laser-based gas sensors for energy and environment"


    01.11.2021

    Prof. Dr. Ziawasch Abedjan, Leibniz Universität Hannover, Institut für Praktische Informatik
    "Democratizing Data Science through Example-Driven Data Preparation"

    Prof. Dr. Sören Auer, Technische Informationsbibliothek Hannover, Direktor der TIB, Leitung Forschungsgruppe Data Science and Digital Libraries
    "Semantic Research Data Management in the National Research Data Initiative (NFDI) "


    06.12.2021

    Prof. Dr. Carlo Holly, RWTH Aachen University, Lehrstuhl für Technologie Optischer Systeme
    "Engineered Light for Photonic Production"

    Dr.-Ing. Matthias Brockmann, RWTH Aachen, Cluster of Excellence Internet of Production
    "Internet of Production – A digital shadow for a sustainable production"


    10.01.2022

    Dominique Collé, Heidelberg Instruments Mikrotechnik GmbH
    "2.5D & 3D micro-structures with Maskless Laser Lithography: Grayscale lithography & Two-photon Polymerization.”"

    Prof. Dr. Henning Menzel, TU Braunschweig, Institut für Technische Chemie
    "Polymeric materials for PhoenixD"


    07.02.2022

    Prof. Dr.-Ing. Stephan Barcikowski, University of Duisburg-Essen, Institute of Technical Chemistry
    "Laser Synthesis of Colloidal Metal and Alloy Colloids – Fundamentals, Scalability and Alloy Phase Structure"

    Dr. Michael Steinke, Leibniz Universität Hannover, HITec – Hannover Institute of Technology
    "Optical glass fiber research and development at the LUH HITec"


    07.03.2022

    Dr.-Ing. Wladimir Bickel, MTU Maintenance
    „Digitalization @ MTU Maintenance”

    Nicolas Nübel, Leibniz Universität Hannover, Institut für Fertigungstechnik und Werkzeugmaschinen
    "Virtual Workpiece-Twin"

  • Sommer 2021

    03.05.2021

    Dr. Marco Jupé, Laserzentrum Hannover, Abteilung Optische Komponenten
    "Development of optical components for integrated systems"

    Aljoscha Schu & Dr. Moritz Seyfried, ficonTEC Service GmbH
    "Think global, act local: Automated assembly solutions for next gerneration photonic modules"


    07.06.2021

    Dr. Sven Burger, Zuse Institut Berlin, JCMwave GmbH
    "Methods for numerical optimization of resonant nano-photonic devices"

    Prof. Dr. Günter Steinmeyer, Max-Born Institut Berlin, HU Berlin
    "Time-resolved spectroscopy on quantum heterostructures"


    14.06.2021

    Sonderkolloquium
    Rafael Salas-Montiel, Université de technologie de Troyes, France
    "Integrated optic devices: towards applications in quantum photonics"


    05.07.2021

    Marvin Treger, Leibniz Universität Hannover, Institut für Anorganische Chemie
    "Optical properties of hybrid materials from first principles"

    Prof. Dr. Olivier J.F. Martin, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland
    "Plasmonic metasurfaces: from machine-learning design to technological challenges"


    19.07.2021

    Sonderkolloquium
    Prof. Dr. Sebastian Polarz, Leibniz Universität Hannover, Institute of Inorganic Chemistry
    "Semiconductor Nanostructures with Optical Disorder"

  • Winter 2020/21

    05.10.2020

    Dr.-Ing. Fabian Lange
    "Theorie des erfinderischen Problemlösens – Kann man Erfinden lernen? (TRIZ)"


    02.11.2020

    Dr. Christoph Kaiser, Innovation Lab GmbH
    "Functional Print to Market"

    Dr. Gerardo Hernandez-Sosa,  Innovation Lab GmbH
    "Scientific Hot Spot in Organic Electronics"

    Dr. Karl-Phlipp Strunk, Innovation Lab GmbH
    "Towards Hybrid and Organic Electronics Sensor Nodes through International Research"


    07.12.2020

    Prof. Dr. Ömer Ilday, Bilkent University, Ankara, Department of Electrical & Electronic Engineering
    "Nonlinear feedback-driven laser-material interactions"


    11.01.2021

    Prof. Dr. Horst Weller, Universität Hamburg, Institut für Physikalische Chemie
    "Synthesis, Properties and Applications of Nanocrystals in Materials and Life Sciences"

    Prof. Dr.-Ing. Thomas Niendorf, Universität Kassel, Institut für Werkstoffkunde
    "Additive Manufacturing – Current Challenges related to Materials Engineering"


    01.02.2021

    Prof. Dr. Aleksandr Ovsianikov, TU Wien, Institute of Materials Science and Technology
    "Additive Multiphoton Lithography (MPL) for Biomedical Applications"

    Prof. Dr.-Ing. Otto Andreas, TU Wien, Institute of Production Engineering and Photonic Technologies
    "Multiphysical Simulation of Laser Material Processing: From the micro to the macro scale, from basic research to industrial applications"


    01.03.2021

    Talash Malek, Leibniz Universität Hannover, Instituts für Fertigungstechnik und Werkzeugmaschinen
    „Precision Machining”

    Sebastian Guggenmos, KERN Microtechnik GmbH
    "Smart Machining – Robust manufacturing at the limit to ultraprecision"

  • Sommer 2020

    Aufgrund der Corona-Pandemie sind die Kolloquien im Sommer 2020 ausgefallen.

  • Winter 2019/20

    07.10.2019

    apl. Prof. Dr. Ayhan Demircan, Leibniz Universität Hannover, Institut für Quantenoptik
    "Ultrafast control of light in nonlinear dispersive media"

    Prof. Dr. Fedor Mitschke, Universität Rostock, Institut für Physik
    "Optical telecommunications at the limit: Can soliton molecules help?"


    04.11.2019

    Dr. Stefan Schmeja, Technische Informationsbibliothek, Leibniz Universität Hannover
    "Predatory Journals and Conferences: What they are and how to avoid them"

    Prof. Dr. Wolfgang Osten, Universität Stuttgart, Institute of Technical Optics
    "Optical Imaging and Measurement Technologies in Times of Digital Transition"


    02.12.2019

    Prof. Dr. Annika Raatz, Leibniz Universität Hannover, Institut für Montagetechnik
    "From proof-of-concept to production"

    Dr.-Ing. Jan Wrege, Siemens Healthineers
    "CT Sensor Packages – Trends in Technology and Development"


    13.01.2020

    Macel Held, Leibniz Universität Hannover, Institut für Produktentwicklung und Gerätebau
    "High-Resolution LED Headlamps"

    Dr. Nils Pfullmann, Wabco
    "Automotive headlights - applications of recent optical technologies"


    03.02.2020

    Prof. Dr. Kurt Schneider & Dr. Jil Klünder, Leibniz Universität Hannover, Institut für Praktische Informatik
    "The Crucial Role of Requirements in Software-based Projects"

    Prof. Dr. Andreas Vogelsang, TU Berlin, Berlin Institute of Technology
    "Requirements Engineering - where the informal meets the formal"


    02.03.2020

    Dr. Wolfgang Ebert, Laser Optik GmbH
    „Thin-film coating techniques for high precision laser optics”

    Dr. Oltmann Riemer,  Leibniz-Institut für Werkstofforientierte Technologien
    "High-precision micro-machining of optical functional surfaces"

  • Sommer 2019

    01.04.2019

    Dr. Jörg Neumann, Laserzentrum Hannover
    "Development of the Pulsed Ultraviolet Laser for the Mars Organic Molecule Analyzer (MOMA) on the ExoMars 2020 Rover"

    Prof. Dr. Sabine Ludwigs, Universität Stuttgart, Institute of Polymer Chemistry
    "Multifunctional Nanostructured Polymer Materials for (Opto-) Electronics"


    06.05.2019

    Prof. Dr. Uwe Morgner, Leibniz Universität Hannover, Institut für Quantenoptik
    "Femtosecond waveguide writing in glass and polymer"

    Dr. Ulrich Holländer, Leibniz Universität Hannover, Institut für Werkstoffkunde
    "Brazing processes as coating and bonding technology for thermally loadable multi-material systems"


    20.05.2019

    Sonderkolloquium
    Prof. Dr. Elenor Huntington, Australian National University
    "The future is here, it’s just unevenly distributed"


    03.06.2019

    Dr.-Ing. Carsten Monka-Ewe, TU Braunschweig, Institut für Hochfrequenztechnik
    "A short range Synthetic Aperture Radar system for Imaging of Dielectric Substrates"


    17.06.2019

    Sonderkolloquium
    Dr. Emil Agocs, Hannoversches Zentrum für Optische Technologien
    "The metrology of micro- and nanostructures based on ellipsometry, including the basics of ellipsometry - to address a broader audience"


    01.07.2019

    Dr. Eva Blasco, Karlsruher Institut für Technologie
    „Two-photon Lithography: New Materials and Challenges”

    Dr. Lei Zheng, Hannoversches Zentrum für Optische Technologien
    "Optical fabrication and characterization of 2D and 3D plasmonic and photonic microdevices"


    02.07.2019

    Bernd Eppich, Firma BeamXpert
    Vorstellung Strahlpropagationssoftware "BeamXpertDESIGNER"

    Sergeii Iakushev, Laserzentrum Hannover
    "Application of the beam propagation method for the simulations of different optical waveguide structures"


    02.09.2019

    Dipl.-Ing. Norbert Keil, Fraunhofer-Institut für Nachrichtentechnik, Heinrich-Hertz-Institut, HHI
    "Photonic Components in our Life – From Telecom to Sensing and Medical Applications"

    Dr. Lars Jensen, Laserzentrum Hannover, Abteilung Laserkomponenten
    "Passive and active optical functionalities in integrated optics through dielectric thin films"